Address: 17 Naberezhnaya Severnoy Dviny, Arkhangelsk 163002 Russian Federation. Northern (Arctic) Federal University named after M.V.Lomonosov. Office 1425

Phone / Fax: (818-2) 21-61-18
E-mail: forest@narfu.ru
http://lesnoizhurnal.ru/en/

RussianEnglish



Archive

Optimization of Cutting of Large-Size Sawlog with Sawing Out of Three Square Beams and Two Pairs of Side Boards

Версия для печати
Creative Commons License
These works are licensed under a Creative Commons Attribution 4.0 International License.

A.I. Agapov

Complete text of the article:

Download article (pdf, 0.5MB )

UDС

674.093

DOI:

10.17238/issn0536-1036.2015.1.108

Abstract

The problem of determining the optimum dimensions of beams and boards on the first pass of the cutting of sawlog of large dimensions has been solved with sawing out of three squared beams of the same thickness and two pairs of side boards. In the mathematical model the goal function is a square sum of the cross-section areas of the three beams and two pairs of side boards. The equations of connection, showing the interconnection of the sizes of the beams and side boards with the sawlog diameter, are received on the Pythagorean Theorem base. The mathematical model has been solved by the Lagrangian multiplier method. An algorithm has been worked out by solving the problem, with the help of which, by using a numerical method, the optimal sizes of beams and boards have been found as well as the value of the goal function. It has been determined that the goal function has its maximal value when the thickness of the beam is 0.18 of the log diameter in its top butt-end. It was found that with increasing of boards thickness, their volume increases and the size of the side boards and the volume of these boards is reduced, but the most important, the sum of the amounts of boards and beams takes the maximum value only at a certain ratio of the sizes of these boards and beams. The total thickness of all three squared beams is 0,54 from the log diameter at the top butt-end, the amount of pruned beams is 70%, and the volume of the cutting side boards is 30% of the total volume of plank timber. Pythagorean zone for the given version of cutting out of sawlog is 0.922 from the log diameter in its top butt-end. The proposed algorithm for solving the problem is recommended to use when supply calculating and drafting.

Authors

A.I. Agapov, Doctor of Engineering, Professor

Affiliation

Vyatka State University, Moskovskaya, 36, Kirov, 610000, Russia; е-mail: agapov_ai.34@mail.ru

Keywords

cutting of sawlog, optimal criterion of optimization, two-edging squared beam, side boards, goal function, equation of connection, problem algorithm.

References

1.Agapov A.I. Optimizatsiya brusovo-razval'nogo sposoba raskroya pilovochnika s vypilivaniem dvukh brus'ev [Optimization of Beam-Breaking Way of Sawlog Cutting with Sawing Out of Two Beams]. Kirov, 2011. 77 p. 2. Agapov A.I. Optimizatsiya tekhnologicheskikh protsessov derevoobrabotki [Optimization of Technological Processes of Woodworking]. Kirov, 2012. 81 p. 3.Vetsheva V.F. Pokazateli ispol'zovaniya krupnomernykh breven pri raspilovke ikh s brusovkoy na odin, dva i tri brusa raznoy tolshchiny [The Usage of the Large Logs While Cutting Them with Log Squaring on One, Two and Three Beams with Different Thickness]. Derevoobrabatyvayushchaya promyshlennost', 1971, no. 7, pp. 10–13. 4.Vetsheva V.F. Raskroy krupnomernykh breven na pilomaterialy [Cutting of Large Logs for Saw-Timber]. Moscow, 1976. 168 p. 5.Pizhurin A.A., Rozenblit M.S. Osnovy modelirovaniya i optimizatsii protsessov derevoobrabotki [Fundamentals of Modeling and Optimization of Processes]. Moscow, 1988. 293p.

Optimization of Cutting of Large-Size Sawlog with Sawing Out of Three Square Beams and Two Pairs of Side Boards

 

Make a Submission


ADP_cert_2024.png

Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024"

INDEXED IN: 


DOAJ_logo-colour.png

logotype.png

Логотип.png