Address: 17 Naberezhnaya Severnoy Dviny, Arkhangelsk 163002 Russian Federation. Northern (Arctic) Federal University named after M.V.Lomonosov. Office 1425

Phone / Fax: (818-2) 21-61-18
E-mail: forest@narfu.ru
http://lesnoizhurnal.ru/en/

RussianEnglish



Archive

The Influence of Multilayer Formation on Strength, Deformation and Fracture Toughness Characteristics of Board

Версия для печати
Creative Commons License
These works are licensed under a Creative Commons Attribution 4.0 International License.

V.V. Gorazdova, E.V. Dernova

Complete text of the article:

Download article (pdf, 0.7MB )

UDС

676.273.2

DOI:

10.17238/issn0536-1036.2017.6.160

Abstract

Multilayer formation improves many strength properties of cardboard. The goal of research is to study the multilayer formation of cardboard as one of the factors of increasing and regulating its strength, deformability and fracture toughness. Smolin A.S. and Aksel'rod G.Z. carried out similar studies with respect to the mass types of cardboard in the 90's in the last century. The authors of the paper pay particular attention to the current characteristics of packaging cardboard types: compressive strength by the SCT method, internal bond strength (Scott type), and fracture toughness. The paper presents the test results of model cardboard samples of a wide range of fiber furnish using both primary (bleached and unbleached) normal and high yield semi-finished products and secondary fibers. The multilayer formation modeling, which allows us to change physico-mechanical characteristics purposefully and to obtain materials with prescribed useful qualities, is demonstrated.

Authors

V.V. Gorazdova, Postgraduate Student
E.V. Dernova, Candidate of Engineering Sciences, Associate Professor

Affiliation

Northern (Arctic) Federal University named after M.V. Lomonosov, Naberezhnaya Severnoy Dviny, 17, Arkhangelsk, 163002, Russian Federation; e-mail: v.gorazdova@narfu.ru, e.dernova@narfu.ru

Keywords

combined cardboard, high-yield pulp, semichemical pulp, hardwood and soft-wood bleached pulp, waste paper, strength, deformability, fracture toughness

For citation

Gorazdova V.V., Dernova E.V. The Influence of Multilayer Formation on Strength, Deformation and Fracture Toughness Characteristics of Board. Lesnoy zhurnal [Forestry journal], 2017, no. 6, pp. 160–169. DOI: 10.17238/issn0536-1036.2017.6.160

References

1. Babaevskiy P.G., Kulik S.G. Treshchinostoykost' otverzhdennykh polimernykh kompozitsiy [Crack Resistance of Cured Polymer Compounds]. Moscow, Khimiya Publ., 1991. 336 p. (In Russ.)
2. GOST 13525.1–79. Polufabrikaty voloknistye, bumaga i karton. Metod opredele-niya prochnosti na razryv i udlinenie pri rastyazhenii [State Standard 13525.1–79. Fibre Semimanufactures, Paper and Board. Tensile Strength and Elongation Tests]. Moscow, Standartinform Publ., 2007. 5 p. (In Russ.)
3. GOST 13525.2–80. Polufabrikaty voloknistye, bumaga i karton. Metod opredeleniya prochnosti na izlom pri mnogokratnykh peregibakh [State Standard 13525.2–80. Fibre Semimanufactures, Paper and Board. Method for Determination of Breaking Strength]. Moscow, Standartinform Publ., 2007. 4 p. (In Russ.)
4. GOST 27015–86. Bumaga i karton. Metody opredeleniya tolshchiny, plotnosti i udel'nogo ob"ema [State Standard 27015–86. Paper and Board. Methods for Determining Thick-ness, Density and Specific Volume]. Moscow, Standartinform Publ., 2002. 4 p. (In Russ.)
5. GOST 13648.6–86. Bumaga i karton. Metody opredeleniya soprotivleniya rasslaivaniyu [State Standard 13648.6–86. Paper and Cardboard. Methods of Splitting Strength Determination]. Moscow, Standartinform Publ., 1986. 7 p. (In Russ.)
6. GOST 14363.4–89. Tsellyuloza. Metod podgotovki prob k fizikomekhanicheskim ispytaniyam [State Standard 14363.4–89. Pulp. Preparation of Samples for Physical and Mechanical Tests]. Moscow, Standartinform Publ., 1993. 14 p. (In Russ.)
7. GOST 28686–90. Bumaga dlya gofrirovaniya. Metod opredeleniya soprotivleniya tortsevomu szhatiyu (CCT) gofrirovannogo obraztsa [State Standard 28686–90. Corrugating Paper. Method for Determination of Corrugating Resistance to Edge Compression]. Moscow, Standartinform Publ., 2005. 4 p. (In Russ.)
8. GOST 10711–97. Bumaga i karton. Metod opredeleniya razrushayushchego usiliya pri szhatii kol'tsa (RCT) [State Standard 10711–97. Paper and Board. Method for Determination of Breaking Force by Ring Compression (RCT)]. Moscow, Standartinform Publ., 2003. 8 p. (In Russ.)
9. GOST R ISO 9895–2013. Bumaga i karton. Opredelenie soprotivleniya szhatiyu. Metod ispytaniya na korotkom rasstoyanii mezhdu zazhimami (SCT) [State Standard R ISO 9895–2013. Paper and Board. Compressive Strength. Short-Span Test]. Moscow, Standartinform Publ., 2014. 12 p. (In Russ.)
10. GOST 32096–2013. Karton taroupakovochnyy dlya pishchevoy produktsii [State Standard 32096–2013. Packaging Paperboard for Food Products. General Specifications]. Moscow, Standartinform Publ., 2014. 24 p. (In Russ.)
11. Dul'kin D.A., Spiridonov V.A., Komarov V.I., Blinova L.A. Svoystva tsellyuloznykh volokon i ikh vliyanie na fiziko-mekhanicheskie kharakteristiki bumagi i kartona [Properties of Cellulose Fibers and Their Influence on Physical and Mechanical Characteris-tics of Paper and Paperboard]. Ed. by V.I. Komarov. Arkhangelsk, NArFU Publ., 2011. 176 p. (In Russ.)
12. Komarov V.I., Gur'ev A.V., El'kin V.P. Mekhanika deformirovaniya tsellyuloznykh taroupakovochnykh materialov [Mechanics of Deformation of Cellulosic Packaging Materials]. Arkhangelsk, ASTU Publ., 2002. 171 p. (In Russ.)
13. Smolin A.S., Aksel'rod G.Z. Tekhnologiya formovaniya bumagi i kartona [The Forming Technology of Paper and Cardboard]. Moscow, Lesnaya promyshlennost' Publ., 1984. 121 p. (In Russ.)
14. ISO/TS 17958:2013. Paper and Board. Determination of Fracture Toughness. Constant Rate of Elongation Method (1.7 mm/s). 2013. 16 p.
15. Makela P., Fellers C. An Analytic Procedure for Determination of Fracture Toughness of Paper Materials. Nordic Pulp Paper Res. J., 2012, vol. 27, iss. 2, pp. 352-361.
16. Muhonen P. Brittleness of Paper: MSc Thesis. Lappeenranta, Finland, 2013. 110 p.
17. SCAN-P77:95. Papers and Boards. Fracture Toughness. Scandinavian Pulp, Paper and Board. Testing Committee, 1995. 8 p.
Received on September 16, 2017

The Influence of Multilayer Formation on Strength, Deformation and Fracture Toughness Characteristics of Board

 

Make a Submission


ADP_cert_2024.png

Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024"

INDEXED IN: 


DOAJ_logo-colour.png

logotype.png

Логотип.png