Address: Naberezhnaya Severnoy Dviny, 17, Arkhangelsk, 163002, Russian Federation, Northern (Arctic) Federal University named after M.V.Lomonosov, office 1425

Phone: +7 (8182) 21-61-18
E-mail: forest@narfu.ru
http://lesnoizhurnal.ru/en/

Lesnoy Zhurnal

Reinforcement Technology of Laminated Wood Structures by Gang Nail

Версия для печати

A.V. Karel'skiy, T.P. Zhuravleva, V.V. Filippov, B.V. Labudin, V.I. Melekhov

Complete text of the article:

Download article (pdf, 0.7MB )

UDС

624.078.4; 624.011.22

DOI:

10.17238/issn0536-1036.2018.1.80

Abstract

Violation of operation modes, manufacturing technology, and force effects in laminated wood constructions of buildings and structures cause defects and damages that reduce their strength and deformation characteristics. The most common defect is the delamination of glue joints with the formation of longitudinal cracks leading to the pre-emergency state of structures, which requires their additional reinforcement. The existing methods of strength-ening are technologically complex and involve the dismantling of defective elements or structures with their replacement by new ones, which leads to additional costs for repair and restoration. Therefore, the use of modern technological solutions to reinforce solid and laminated wood structures is an urgent problem of the construction industry. The strengthening process include three stages: inspection, design and installation works. The inspection stage involves determining all the required parameters for the gain design. To assess the effect of cracks on the bearing capacity of the structure we propose to use a hinged-rod model with glued wood as an anisotropic elastic body with a crack appeared by removing the shear bonds from the discrete system. Based on calculations, the author select the size, step, quan-tity and nail gang type, taking into account the compliance of the joint. We consider options for reinforcing laminated wood structures, methods of nail gang pressing at the design mark, the performing technology. The proposed gang nail reinforcement technologies of laminated wood structures with longitudinal cracks allow reducing the consumption of structural lumber.

Authors

A.V. Karel'skiy, Candidate of Engineering Sciences
T.P. Zhuravleva, Postgraduate Student
V.V. Filippov, Student
B.V. Labudin, Doctor of Engineering Sciences, Professor
V.I. Melekhov, Doctor of Engineering Sciences, Professor

Affiliation

Northern (Arctic) Federal University named after M.V. Lomonosov, Naberezhnaya Severnoy Dviny, 22, Arkhangelsk, 163002, Russian Federation; е-mail: KAW_79@mail.ru

Keywords

wood, laminated wood structure, gang nail, hinged-rod model, glueline defect, delamination, reinforcement

For citation

Karel'skiy A.V., Zhuravleva T.P., Filippov V.V., Labudin B.V., Melekhov V.I. Reinforcement Technology of Laminated Wood Structures by Gang Nail. Lesnoy zhurnal [Forestry journal], 2018, no. 1, pp. 80–88. DOI: 10.17238/issn0536-1036.2018.1.80

References

1. Ermolaev V.V., Tsepaev V.A. Raschetnye kharakteristiki drevesiny v soedi-neniyakh stroitel'nykh konstruktsiy na metallicheskikh zubchatykh plastinakh [Calculated Characteristics of Wood in Structural Connections with Gang Nail]. Zhilishchnoe stroitel'stvo, 2006, no. 2, pp. 14‒15.
2. Karel'skiy A.V. Tekhnologiya izgotovleniya sostavnykh derevyannykh kon-struktsiy s metallicheskimi zubchatymi plastinami: dis. ... kand. tekhn. nauk [Manufacturing Technology of Composite Wooden Structures with Gang Nail: Cand. Eng. Sci. Diss.]. Arkhangelsk, 2015. 138 p.
3. Karel'skiy A.V., Zhuravleva T.P., Labudin B.V., Melekhov V.I. Vliyanie tresh-chin na napryazhenno-deformirovannoe sostoyanie kleenykh derevyannykh balok [Influence of Delamination on the Strain-Stress State of Glued Laminated Beams]. Bezopasnost' stroitel'nogo fonda Rossii. Problemy i resheniya: materialy Mezhdunar. akad. chteniy [Safe-ty of the Building Fund of Russia. Problems and Solutions: Proc. Intern. Academic Read-ings]. Kursk, Kursk State University Publ., 2015, pp. 153‒158. (In Russ.)
4. Karel'skiy A.V., Labudin B.V., Melekhov V.I. Klassifikatsiya defektov i pov-rezhdeniy konstruktsiy, vypolnennykh iz kleenoy drevesiny [Defects and Damages Classifi-cation of Glulam]. Derevyannye konstruktsii-2011: obrazovanie, praktika, innovatsii v stranakh Barentseva Evro-Arkticheskogo regiona: sb. nauch. tr. Mezhdunar. nauch.-obrazovat. seminara [Wooden Constructions ‒ 2011: Education, Practice, Innovations in the Countries of the Barents Euro-Arctic Region: Proc. Intern. Sci. Educational Seminar]. Arkhangelsk, 2012. 165 p. (In Russ.)
5. Karel'skiy A.V., Labudin B.V., Melekhov V.I. Trebovaniya k nadezhnosti i be-zopasnoy ekspluatatsii bol'sheproletnykh kleenykh derevyannykh konstruktsiy [Reliability Requirements for the Large-Span Laminated Wood Structural Elements]. Lesnoy zhurnal [Forestry journal], 2012, no. 3, pp. 143‒147.
6. Kotlov V.G. Prostranstvennye konstruktsii iz derevyannykh ferm s uzlovymi soedineniyami na metallicheskikh zubchatykh plastinakh: avtoref. dis. ... kand. tekhn. nauk [Spatial Structures from Wooden Trusses with Gang Nail Nodes: Cand. Eng. Sci. Diss. Abs.]. Kazan, 1992. 17 p.
7. Kritsin A.V. Raschet skvoznykh derevyannykh konstruktsiy na metallicheskikh zubchatykh plastinakh s uchetom uprugo-vyazkikh i plasticheskikh deformatsiy: avtoref. dis. ... kand. tekhn. nauk [Calculation of Framed Wooden Structures Connected with Gang Nail Considering the Elastoviscoplastic Deformations: Cand. Eng. Sci. Diss. Abs.]. Nizhniy Novgorod, 2004. 24 p.
8. Loskutova D.V. Prochnost' i deformativnost' uzlovykh soedineniy na metallich-eskikh zubchatykh plastinakh v skvoznykh derevyannykh konstruktsiyakh: avtoref. dis. ... kand. tekhn. nauk [Strength and Deformability of the Gang Nail Joint Connections in Framed Wooden Structures: Cand. Eng. Sci. Diss. Abs.]. Tomsk, 2009. 24 p.
9. Mironov V.G. Proektirovanie stroitel'nykh konstruktsiy s soedineniyami na me-tallicheskikh nagel'nykh plastinakh v stranakh SNG [Design of Building Structures with Gang Nail Connections in the CIS Countries]. Proektirovanie i izgotovlenie derevyannykh konstruktsiy s soedineniyami na metallicheskikh nagel'nykh plastinakh i nagel'nykh grup-pakh: sb. dokl. Mezhdunar. konf., Kirov, 1–3 sent. 1992 g. [Designing and Manufacturing of Wooden Constructions with Gang Nailed and Nailed Group Connections: Proc. Intern. Conf., Kirov, 1‒3 September 1992]. Kirov, 1992, pp. 11‒25. (In Russ.)
10. Naychuk A.Ya. Prochnost' elementov derevyannykh konstruktsiy v usloviyakh slozhnogo neodnorodnogo napryazhennogo sostoyaniya: dis. ... d-ra tekhn. nauk [Strength of Wooden Structural Elements within the Conditions of Complex Non-Homogeneous Stress: Dr. Eng. Sci. Diss.]. Moscow, 2006. 378 p.
11. Naumov A.K. Izgotovlenie derevyannykh konstruktsiy, soedinennykh metal-licheskimi zubchatymi plastinami [Manufacturing of Wooden Structures Connected with Gang Nail]. Mekhanicheskaya obrabotka drevesiny, 1976, no. 7, pp. 8‒10.
12. Orlovich R.B., Labudin B.V. Deformativnost' uprugopodatlivykh soedineniy v derevyannykh konstruktsiyakh pri dlitel'nykh vozdeystviyakh [Deformation of Resilient Joints in Wooden Structures after Long-Term Effects]. Lesnoy zhurnal [Forestry journal], 1993, no. 1, pp. 78‒82.
13. Roshchina S.I., Sergeev M.S., Lukina A.V. Armirovannye derevyannye kon-struktsii [Reinforced Wooden Structures]. Lesnoy zhurnal [Forestry journal], 2013, no. 4, pp. 80‒85.
14. Serov E.N. Ratsional'noe ispol'zovanie anizotropii prochnosti materialov v kleenykh derevyannykh konstruktsiyakh massovogo izgotovleniya: dis. ... d-ra tekhn. nauk [Rational Use of Strength Anisotropy in the Laminated Wood Structures of Mass Produc-tion: Dr. Eng. Sci. Diss.]. Leningrad, 1988. 521 p. (In Russ.)
15. SP 13-102–2003. Pravila obsledovaniya nesushchikh stroitel'nykh konstruktsiy zdaniy i sooruzheniy [Code Specification 13-102–2003. Rules for Inspection of Load-Bearing Structures of Buildings and Constructions.] Moscow, Gosstroy Rossii Publ., 2003. 28 p.
16. Stoyanov V.V. Derevyannye konstruktsii v usloviyakh Evropeyskogo Severa [Timber Constructions in the European North]. Lesnoy zhurnal [Forestry journal], 2014, no. 4, pp. 149‒153.
17. Stoyanov V.V., Zhgalli Sh. Povyshenie nesushchey sposobnosti derevyannykh izgibaemykh elementov [Load Bearing Capacity of Wooden Bending Elements]. Lesnoy zhurnal [Forestry journal], 2016, no. 1, pp. 115‒121.
18. Tsepaev V.A. Issledovanie dlitel'noy prochnosti i deformativnosti soedineniy elementov derevyannykh konstruktsiy na metallicheskikh zubchatykh plastinakh: dis. ... kand. tekhn. nauk [Investigation of Long-Term Strength and Deformability of Gang Nail Connections of Wood Structure Elements: Cand. Eng. Sci. Diss.]. Moscow, 1982. 204 p.
19. Beineke L., Suddarth S. Modeling Joints Made with Light-Gage Metal Connector Plates. Forest Products Journal, 1979, vol. 29, no. 8, pp. 39‒45.
20. Blaß H.J., Schädle P. Ductility Aspects of Reinforced and Non-Reinforced Timber Joints. Engineering Structures, 2011, vol. 33, iss. 11, pp. 3018‒3026.
21. Erdodi L., Bodi I. Experimental and Numerical Analysis of Timber Joints. High Performance Structures and Materials. The 2nd Intern. Conf. Heraklion, Greece, March 12–15, 2004. Ed. by C.A. Brebbia, W.P. Wilde. London, Witpress, 2004, pp. 201‒210.
22. Fox S.E. Repair of Wood Trusses. Structure Magazine, 2008, November, pp. 46‒49.
23. Gattesco N., Macorini L. In-plane Stiffening Techniques with Nail Plates or CFRP Strips for Timber Floors in Historical Masonry Buildings. Construction and Building Materials, 2014, vol. 58, pp. 64‒76.
24. Humbert J., Boudaud C., Baroth J., Hameury S., Daudeville L. Joints and Wood Shear Walls Modelling I: Constitutive Law, Experimental Tests and FE Model under Quasi-Static Loading. Engineering Structures, 2014, vol. 65, pp. 52‒61.
25. Karadelis J., Brown P. Punched Metal Plate Timber Fasteners under Fatigue Loading. Construction and Building Materials, 2000, vol. 14, iss. 2, pp. 99‒108.
26. Loferski J.R., Bouldin J.C., Hindman D.P. Development of a Methodology for the Visual Inspection of Engineered Wood Products and Metal Hangers in Residential Con-struction. Proc. 2nd Intern. Conf. Structural Health Assessment of Timber Structures. Trento, Italy, September 4–6, 2013. Ed. by M. Piazza, M. Riggio. Trento, Italy, 2013, pp. 342‒349.
27. Malinowski С. Zur Geschichte der Verbindungstechnik-Verbinder aus Stahlblech. Bauen mit Holz, 1989, vol. 12, pp. 872‒877.
28. Nielsen J. An Unravelling of the Effect of Partially Embedded Punched Metal Plate Fastener on the Lateral Anchorage Strength. Structural Design, 1999, no. 3. 19 p.
29. Rammer D.R. Wood: Mechanical Fasteners. Reference Module in Materials. Science and Materials Engineering. Ed. by S. Hashmi. Oxford, Elsevier, 2016, pp. 1‒10.

Received on 19.09.17


Reinforcement Technology of Laminated Wood Structures by Gang Nail

 

Make a Submission


ADP_cert_2024.png

Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024"

INDEXED IN: 


DOAJ_logo-colour.png

logotype.png

Логотип.png