Address: Naberezhnaya Severnoy Dviny, 17, Arkhangelsk, 163002, Russian Federation, Northern (Arctic) Federal University named after M.V.Lomonosov, office 1425

Phone: +7 (8182) 21-61-18
E-mail: forest@narfu.ru
http://lesnoizhurnal.ru/en/

Lesnoy Zhurnal

Effect of Technical Aerosil on the Properties of Adhesive Compositions

Версия для печати

Е.G. Sokolova, D.S. Rusakov, G.S. Varankina, A.N. Chubinsky

Complete text of the article:

Download article (pdf, 1.3MB )

UDС

674.812

Abstract

The main drivers of competition among the products made with the use of adhesive compositions are the toxicity of finished products, the consumption of raw materials and energy resources, the duration of the main technological operations. These drivers can be controlled by using adhesives with different fillings and/or modifications. Adhesives based on phenol-formaldehyde and melamine-urea-formaldehyde resins are used to produce plywood with increased water resistance. Apart from resins, adhesives usually contain hardeners, fillers, and modifiers that affect the properties of the finished product. Technical aerosol is one of the modifiers of synthetic resins with a wide range of action. Aerosil is characterized by three types of interaction: physical adsorption, chemical adsorption (formation of hydrogen bridges by silanol groups), and chemical reactions on the surface layer. The chemical composition of aerosil was analyzed. Technical aluminum fluoride (AlF3) is of particular interest. It can interact with alkali metal fluorides with the formation of complex compounds that improve polymer structuring. The acids that make up aerosil reduce the pH to 2.0–3.5, so they can be catalysts for the curing process of melamine-urea-formaldehyde resins. The effect of technical aerosil on the properties of adhesive systems based on phenol-formaldehyde and melamine-ureaformaldehyde resins has been studied. Viscosity, curing time, and wetting ability of adhesive compositions were determined. The obtained results indicate the possibility of using this modifier in the composition of phenol-formaldehyde and melamine-urea-formaldehyde resins up to 15 pts. wt. The nature of the aerosil action on adhesive compositions was determined using IR spectroscopy. Analysis of the results showed that aerosil promotes deep structure formation of the polymer by increasing the molecular weight of the molecules. These bonds make it possible to form a more structured polymer with bound formaldehyde. Studies of the effect of aerosil on the properties of finished products were carried out. At the same time, an increase in performance indicators was found: the strength of adhesion increases, the toxicity of plywood decreases. The results of experiments on the effect of technical aerosil, taking into account the reduction of bonding time can be applied in the development of technological processes for obtaining plywood of high water resistance.

Authors

Ekaterina G. Sokolova, Candidate of Engineering, Assoc. Prof.; ResearcherID: ABE-3531-2020, ORCID: https://orcid.org/0000-0002-9698-9321
Dmitry S. Rusakov, Candidate of Engineering, Assoc. Prof.; ResearcherID: I-9245-2017, ORCID: https://orcid.org/0000-0002-4344-2779
Galina S. Varankina, Doctor of Engineering, Prof.; ResearcherID: H-1922-2019, ORCID: https://orcid.org/0000-0003-3470-5124
Anatoly N. Chubinsky, Doctor of Engineering, Prof.; ResearcherID: I-9432-2016, ORCID: https://orcid.org/0000-0001-7914-8056

Affiliation

Saint Petersburg State Forest Technical University, Institutskiy per., 5, Saint Petersburg, 194021, Russian Federation; e-mail: nikitinaek@rambler.rudima-ru25@mail.ruvaragalina@yandex.rua.n.chubinsky@gmail.com

Keywords

plywood, phenol-formaldehyde resin, melamine-urea-formaldehyde resin, modification, technical aerosil, properties of adhesives, IR spectroscopy, veneer gluing modes, strength of products, toxicity of products

For citation

Sokolova E.G., Rusakov D.S., Varankina G.S., Chubinsky A.N. Effect of Technical Aerosil on the Properties of Adhesive Compositions. Lesnoy Zhurnal [Russian Forestry Journal], 2021, no. 3, pp. 133–144. DOI: 10.37482/0536-1036-2021-3-133-144

References

1. Anisimov M.V. Zeolite Filler, Activated in Electromagnetic Fields for the Production of Plywood. Lesotekhnicheskiy zhurnal [Forestry Engineering Journal], 2013, no. 4, pp. 94–102. DOI: https://doi.org/10.12737/2186
2. Varankina G.S., Chubinskiy A.N., Brutyan K.G. Modified Urea-Formaldehyde and Phenol-Formaldehyde Adhesives for Wood Chipboards and Plywood. Klei. Germetiki. Tekhnologii [Adhesives. Sealants. Technologies], 2017, no. 6, pp. 12–14.
3. Varankina G.S., Rusakov D.S., Sokolova E.G., Chubinsky A.N. The study of powdered phenol-formaldehyde resins for the manufacture of plywood. Izvestia Sankt-Peterburgskoj Lesotehniceskoj Akademii [News of the Saint Petersburg State Forest Technical Academy], 2020, iss. 231, pp. 151–166. DOI: https://doi.org/10.21266/2079-4304.2020.231.151-166
4. Glebov M.P., Brutyan K.G. Analysis of Natural Mineral Modifiers for Adhesive Resins. Primary Wood Processing. Sawmilling and Drying of Timber. State and Prospects for Development. Saint Petersburg, SPbGLTA Publ., 2007, pp. 28–33.
5. State Standard. GOST 9624–2009. Laminated Glued Wood. Method for Determination of Shear Strength. Moscow, Standartinform Publ., 2010. 11 p.
6. State Standard. GOST 27678–2014. Wood-Based Panels and Plywood. Perforator Method for Determination of  ormaldehyde Content. Moscow, Standartinform Publ., 2015. 9 p.
7. State Standard. GOST 20501–2015. Glues for Wood. Methods for Determination of Technological Characteristics.
8. Deineko I.P. Utilization of Lignins: Achievements, Problems and Prospects. Khimija Rastitel’nogo Syr’ja [Chemistry of plant raw material], 2012, no. 1, pp. 5–20.
9. Doronin Yu.G., Miroshnichenko S.N., Svitkina M.M. Synthetic Resins in Woodworking. Moscow, Lesnaya promyshlennost’ Publ., 1987. 220 p.
10. Zhuk P.M. Analysis of Methods of Reducing Formaldehyde Emission from Wood Boards. Mezhdunarodnyy nauchno-issledovatel’skiy zhurnal [International Research Journal], 2017, no. 11(65), part 4, pp. 36–40. DOI: https://doi.org/10.23670/IRJ.2017.65.117
11. Kazakevich T.N. Gluing of Coniferous Veneer at Low Temperatures: Cand. Eng. Sci. Diss. Abs. Saint Petersburg, 1998. 20 p.
12. Kondratyev V.P., Kondrashchenko V.I. Synthetic Adhesives for Wood-Based Materials. Moscow, Nauchnyy mir Publ., 2004. 520 p.
13. Kondratiev V.P., Chubov A.B., Sokolova E.G. The Improvement of Application Properties and Technology of Increased Waterresistance Plywood. Izvestia Sankt-Peterburgskoj Lesotehniceskoj Akademii [News of the Saint Petersburg State Forest Technical Academy], 2011, iss. 194, pp. 114–120.
14. Plotnikova G.P., Plotnikov N.P. Modification of Urea-Formaldehyde Binders for the Production of Wood Particle Board. Collection of Academic Papers SWORLD. Odessa, Nauchnyy mir Publ., 2013, vol. 44, no. 3, pp. 88–90
15. Sokolova E.G. Modification of Phenol-Formaldehyde Resin with Melamine-Carbamide-Formaldehyde Resin for Bonding Plywood. Sistemy. Metody. Tekhnologii [Systems. Methods. Technologies], 2018, no. 2(38), pp. 111–115. DOI: https://doi.org/10.18324/2077-5415-2018-2-111-115
16. Sokolova E.G., Rusakov D.S., Chubinskiy A.N., Varankina G.S., Ugryumov S.A. Estimation of Service Properties of Modified Synthetic Resins and Plywood Based on Them. Klei. Germetiki. Tekhnologii [Adhesives. Sealants. Technologies], 2020, no. 9, pp. 10–15. DOI: https://doi.org/10.31044/1813-7008-2020-0-9-10-15
17. Plywood Manufacturer’s Guide. Ed. by A.V. Volkov, A.T. Orlov. Saint Petersburg, Polytechnic University Publ., 2010. 486 p.
18. Ugryumov S.A. Structure and Properties of Phenol-Formaldehyde Resins Modified with Furfural-Acetone Monomer as Applied to the Production of Wood-Based Panel Materials. Wood Boards: Theory and Practice. Proceedings of the 20th International Scientific and Practical Conference. Saint Petersburg, SPbPU Publ., 2017, pp. 48–52.
19. Ugryumov S.A., Sviridov A.V., Fedotov A.A. Study of Modified Phenol-Formaldehyde Oligomer Properties by IR-Spectroscopy Method. Klei. Germetiki. Tekhnologii [Adhesives. Sealants. Technologies], 2017, no. 12, pp. 26–28.
20. Fedotov A.A., Ugryumov S.A. Study of Water Resistance of Particle Boards Based on Modified Phenol-Formaldehyde Oligomers. Academic Papers of Young Scientists of KSTU. Kostroma, KSTU Publ., 2014, iss. 15, pp. 45–49.
21. Tsvetkov V.E., Yakun’kin A.A. Synthesis, and Properties of Urea-Formaldehyde Resins Modified with Organic Acid Salts. Technology and Equipment for Wood Processing. Moscow, MGUL Publ., 2006, iss. 335, pp. 220–223.
22. Chubinskiy A.N., Kazakevich T.N. Gluing of Coniferous Plywood at Low Temperatures. Derevoobrabatyvayushchaya promyshlennost’, 1992, no. 4, pp. 4–5.
23. Osetrov A.V., Ugryumov S.A. Assessment of Activation Energy of Modified Phenol-Formaldehyde Resin. Polymer Science, Series D, 2016, vol. 9, iss. 1, pp. 31–32. DOI: https://doi.org/10.1134/S1995421216010160
24. Ugryumov S.A. A Study of the Viscosity of Phenol–Formaldehyde Resin Modified with Furfural–Acetone Monomer FA. Polymer Science, Series D, 2017, vol. 10, iss. 2, pp. 99–102. DOI: https://doi.org/10.1134/S199542121702023X
25. Ugryumov S.A., Tsvetkov V.E. Enhancement of Service Characteristics of Boon Boards by Modifying Carbamide-Formaldehyde Binder with Poly(Vinyl Acetate) Dispersion. Polymer Science, Series D, 2008, vol. 1, iss. 4, pp. 241–243. DOI: https://doi.org/10.1134/S1995421208040059
26. Ugryumov S.A., Sviridov A.V., Fedotov A.A. Investigation of the Properties of Modified Phenol-Formaldehyde Oligomer Using IR Spectroscopy. Polymer Science, Series D, 2018, vol. 11, iss. 3, pp. 277–279. DOI: https://doi.org/10.1134/S1995421218030206
27. Uguina M.A., Sotelo J.L., Serrano D.P. Roles of ZSM-5 Modifier Agents in
Selective Toluene Disproportionation. The Canadian Journal of Chemical Engineering, 1993, vol. 71, iss. 4, pp. 558–563. DOI: https://doi.org/10.1002/cjce.5450710408
28. Vick C.B. Phenolic Adhesive Bonds to Aspen Veneers Treated with Amino-Resin Fire Retardants. Forest Products Journal, 1994, vol. 44, no. 1, pp. 33–40.
29. Vick C.B. Coupling Agent Improves Durability of PRF Bonds to CCA-Treated Southern Pine. Forest Products Journal, 1995, vol. 45, no. 3, pp. 78–84.
30. Weiland J.J., Guyonnet R. Study of Chemical Modifications and Fungi Degradation of Thermally Modified Wood Using DRIFT Spectroscopy. Holz als Roh- und Werkstoff [European Journal of Wood and Wood Products], 2003, vol. 61, iss. 3, pp. 216–220. DOI: https://doi.org/10.1007/s00107-003-0364-y
31. Wotten A.L., Sellers T., Tahir P.M. Reaction of Formaldehyde with Lignin. Forest Products Journal, 1988, vol. 38, no. 6, pp. 45–46.

Effect of Technical Aerosil on the Properties of Adhesive Compositions

 

Make a Submission


ADP_cert_2024.png

Lesnoy Zhurnal (Russian Forestry Journal) was awarded the "Seal of Recognition for Active Data Provider of the Year 2024"

INDEXED IN: 


DOAJ_logo-colour.png

logotype.png

Логотип.png